These wood working plans include:
The following drawings:
- Foundation Plan including sections of the pressure treated wood, concrete slab and concrete block.
- Elevation of the Back Side showing framing of the studs and height of the walls.
- Side Elevation showing the truss layout on the walls, as well as the arrangement of wall sheathing.
- Elevation of the front showing gable end barge boards and door with trim.
- Elevation of the front #2 showing the framing of the door and overhang.
- Section of a Truss detailing the layout with gussets and angles of cuts.
The plans have a List of Materials, which includes size and quantities for:
- Door trim
- Corner boards
- Studs
- Plates
- Trusses
- Joists
- Sub-floor
- Wood foundation
- Gussets for the trusses
- OSB for the walls and roof
- Area of the roof
- Fastenings for the hinges, etc.
- The framing
- Sheathing
- Roofing.
The Instructions include the following topics:
- The Foundation
- Concrete Slab: Discussing the placement of anchor bolts; the thickness of the concrete slab and perimeter as well as the material under the slab.
- Concrete Block: The size of footings required; design of the forms; how to install anchor bolts and the sill plate.
- Wooden Floor: The wood foundation; the layout of the floor, size of joists, their centers, squaring the floor, how to install tongue and groove (T&G) plywood - staggering and nailing the sheets.
- The Walls: Installing the bottom plate; layout of the studs, constructing the side walls, bracing the walls.
- The Trusses: Laying out the trusses full size from the drawings.
- Putting it Together: Bracing the walls; laying out the trusses on the walls; erecting the trusses.
- Sheathing the Walls: Framing and sheathing the front and back walls; framing the door; installing sheathing on the walls.
- Making the Roof: Sheathing the roof; installing the overhang and barge boards.
- The Trim and Door: Trimming the roof, door; constructing and hanging the door.
Dave
